Keep winter’s chill from leaking into your warm house

Drafty attics, fireplaces, leaky windows and open vents provide the perfect opportunity for winter’s chill to sneak into your house and have you shivering from the cold. Not only does this cause you to huddle under extra layers of clothing and heavy blankets, but also probably has you spending more money than you want turning up the thermostat.

Drafts, such as those around doors, windows and pipes, are the largest source of heating and cooling loss in the home. Most homeowners tackle the easy leaks by caulking and weather-stripping to minimize energy loss and drafts.

But what can you do about drafts from the four largest “holes” in your home – the folding attic stair, the whole house fan, the fireplace and the clothes dryer? Here are some tips and techniques that can quickly, easily and inexpensively seal and insulate these often overlooked holes:

Attic stairs

Installing attic stairs creates a large hole (approximately 10 square feet) in your ceiling. The ceiling and insulation that were there have to be removed, leaving only a thin, unsealed, sheet of plywood.

Often you can see a gap around the perimeter of the attic door. Check out your home’s attic entrance: At night, turn on the attic light and shut the attic stairway door – do you see any light coming through? If you do, heated and air-conditioned air is leaking through these large gaps in your home 24 hours a day. This is like leaving a window or skylight open year-round.

An easy solution to this problem is to add an insulated attic stair cover. An attic stair coverseals the stairs to stop drafts and energy loss. Add the desired amount of insulation over the cover to restore the insulation removed from the ceiling.

Whole house fans and air conditioning vents

Much like attic stairs above, installing a whole house fan creates a large hole (up to 16 square feet or larger) in your ceiling. The ceiling and insulation that were there have to be removed, leaving only the drafty ceiling shutter between you and the outdoors.

An easy, low-cost solution to this problem is to add a whole house fan shutter seal. Made from white textured flexible insulation, the shutter seal is installed over the ceiling shutter, secured with Velcro and trimmed to fit. The shutter seal can also be used to seal and insulate air conditioning vents, and is easily removed when you need to run the fan.


More than 100 million homes in North America are constructed with wood- or gas-burning fireplaces. However, fireplaces can be big energy wasters. Fireplaces can act like a giant straw, sucking your expensive heated or air-conditioned air right up the chimney and out of your house. In addition, sometimes odors, toxins, noise and insects come into the house through the chimney.

Fireplaces often have dampers that are meant to be shut when the fireplace is not used. However, even if the damper is shut it is not air-tight. Glass doors don’t stop the drafts either. One study has shown that an open damper on an unused fireplace in a well-insulated house can raise overall heating-energy consumption by 30 percent. Your heating bills may be more than $500 higher per winter due to the drafts and wasted energy caused by fireplaces.

An easy, cost efficient solution to this problem is to add a fireplace plug to your fireplace. The fireplace plug is an inflatable pillow that seals the fireplace damper, eliminating drafts, odors and noise. The pillow is easily removed whenever the fireplace is used, then reinserted after.

Clothes dryer exhaust ducts

In many homes, the room with the clothes dryer is the coldest room in the house. Your clothes dryer is connected to an exhaust duct that is open to the outdoors. In the winter, cold drafts come in through the duct, through your dryer and into your house.

An easy, low-cost solution to this problem is to add a dryer vent seal. This draft blocker will also keep out pests, bees and rodents. The vent will remain closed unless the dryer is in use. When the dryer is in use, a floating shuttle rises to allow warm air, lint and moisture to escape.

Posted in Home Improvement | Tagged , , , , | Leave a comment

Renovation Etiquette

“No man is an island” or lives on one — especially when contractors are called into the neighborhood. So before you build an addition, replace your plumbing or reroof your house, remember that communication is key and keep these guidelines in mind:

– Don’t assume. While your neighbors might invite you to use their shower one evening, don’t show up with your shampoo and washcloth every morning before work.

– Do let the neighbors in on your plans. Construction vehicles will not make a pleasant backdrop for their son’s graduation party; nor will dust from building an addition be appreciated. Try to work around their important events as well as yours.

– Don’t let contractors’ vehicles block neighbors’ driveways, busy roads or rural mailboxes. This can be an inconvenience at any time of day but particularly when a neighbor is trying to leave for work or pick up a child at school.

– Do watch the clock. Even if local bylaws permit, chain saws are not the way most people want to be awakened on Saturday morning. And flood lights into the wee hours will not sit well with neighbors who have small children or who need to sleep at 10 p.m. Aim lights carefully and mask the sides of spotlights whenever possible.

– Do know your property line and the zoning codes. Don’t build that fence or put up that shed until you share your plan with your neighbor. Even if it is on your property and within codes, they will live with it as much as you. Better to get their buy-in beforehand.

– Do make sure all dumpsters arrive and are removed promptly and that your contractor cleans the area thoroughly. That includes “sweeping” with magnets for nails so you don’t create a tire hazard for others who live or park nearby.

– Do know what permits you need. When you and a contractor draw up a contract, you can specify that the contractor will get all permits and arrange for inspections on your behalf. Not only could a lack of permits slow completion, it can increase cost and frustration – for you and your neighbors.

– Do tell your contractor your house rules. Can they use your electricity, gas and water? When and where can they clean tools? How early can workers arrive and how late can they stay?

– Do identify and mind your personal space. If your bathrooms are off-limits to the contractors, make sure they bring in or have access to other facilities. While you need to make yourself available for questions, you can say that you are not to be disturbed in your home office or at certain times during the day.

Do inspect your renovations regularly to keep yourself informed at all times. This will help eliminate the risk of surprises or costly last minute changes to your project.

A little consideration and a lot of planning go a long way in keeping the peace – and keeping projects on schedule – when you renovate your home.

*To reproduce this article—in whole or in part—please use the following credit:

Article reproduced with permission from

Posted in Home Improvement | Leave a comment

Home Remedies on CBSNews!

I’ve always been passionate about helping moms find a better balance between career and family and was more than happy to share my insights with CBSNews!

Check out this segment on work at home solutions for moms and what it takes to launch a successful home based business:

Posted in Home Improvement | Leave a comment